Saturday, November 21, 2009
Lemon Battery
It is possible to make a simple battery from a lemon. This is a very simple experiment and requires no expensive or complex equipment. A basic battery consists of two different metals suspended in an acid solution. For our experiment a lemon (citric acid) or vinegar (acetic acid) works well. The lemon juice is the electrolyte through which electrons will travel from one metal to the other.
A good fresh and juicy lemon works best, but a potato or apple can easily be used. Cut a shallow slit in one side of the lemon and insert either a copper coin (sometimes coins thought to be copper are in fact not pure copper so use copper wire instead if necessary), and in the other side insert a galvanised nail (which is coated with zinc) or metal paperclip. The copper coin/wire is the +ve electrode of the cell, and the galvanised nail is the -ve electrode. The electrons will travel from the -ve electrode through the electrolyte to the +ve electrode - thereby creating an electric current. Below is an illustration of an aluminium-copper lemon cell.
If you measure the voltage across the lemon cell then it will be just under 1 volt - not enough to do anything useful. However if you connect a few of these lemon cells together in series (+ve to -ve, +ve to -ve, and so on as shown above) then a higher voltage battery can be built. Once the voltage is over 2-3 volts the battery of lemon cells can be used to light up (not very brightly) an LED. Four lemon cells connected in series will typically generate around 3.5 volts.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment